All Lucia models includes the following DSP processing:
- Comprehensive DSP features Per channel presets for high-pass filter, parametric EQ, multi-band compressor, and look-ahead limiter
- Automatic Dynamic Loudness Contouring DSP automatically adapts to optimize performance at any output level
- Optimized presets Available for specific loudspeaker models
- RS232 Remote control and monitoring from third party control solutions
- GPIO Remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
- Intelligent fan control Silent operation at idle and at lower output levels
- Fail-safe operation Comprehensive short circuit, thermal, and under-voltage protection
- Configuration software Windows and Mac software wizard for initial set-up, and advanced editor for preset configuration (LUCIA connection via USB)
Additional features on LUCIA 60/2M, 120/2M and 240/2M only
- Maximum output power across range of loads Power output remains constant into 2, 4 or 8 ohms
- Auto Load Sense Proprietary auto-set VPL (Voltage Peak Limiter) for optimum performance with any connected load
- 4 x 4 mix matrix Route input signals internally to amplifier or to line-level outputs
Additional features on LUCIA 60/2, 120/2 and 240/2 only
- Maximum output power across range of loads Power output remains constant into 2, 4 or 8 ohms
- Auto Load Sense Proprietary auto-set VPL (Voltage Peak Limiter) for optimum performance with any connected load
- 2 x 2 mix matrix Route input signals internally to either one or both amplifier channels
Additional features on LUCIA 60/1-70, 120/1-70 and 240/1-70 only
- Model for constant voltage applications into 70 V/100 V
- 2 x 1 mix matrix Mix two sources to mono or use for source selection